Description
Gas analyser of explosives is intended for detection of explosives
in non-tight volumes and traces of explosives on a surface of surveyed objects.
Detection is carried out by sampling air from internal volumes of surveyed
objects or from their surfaces and the analysis of tests on contents of
characteristic components of explosive vapor.
The detector is capable to detect traces of explosives based on nitroglycerine (NG), EGDN, trinitrotoluene (tol, trotyl, TNT), hexogen, octogen, TEN, PENT (tetranitrapentaerythrit, pentaerythrittetranitrate, Pentrit, PENT), hexogen (RDX), oktogen (HMX), tetryl (Tetril) and nitrocellulose powders, engaging mixing explosives on their ground: Semtex and other plastic and elastic explosives on the basis of RDX, PENT or their mixture.
Signal level and ionogram of the test are displayed on
the color graphic display of the device. Position
of the ‘peak’ of the ionogram makes it possible to draw a preliminary
conclusion regarding detected explosive. Device’s memory stores information
about more than million ionograms.
Premium delivery set contains interface cable (USB
or RS-232) that ensures data transfer to PC and data storage. Skilled operator
is able to identify type of explosive detected using ionogram displayed in the
monitor.
Vapor detector can be used to protect enterprises, banks,
governmental buildings, offices, living premises, different means of transport
(automobile, air, railroad, water).
Features
- Drift spectrometer with ionogram output on the computer.
- Combines high sensitivity, selectivity and noise immunity.
- Wide range of detected explosives.
- Stable operation in wide range of environmental humidity and temperature.
- The operation threshold of the detector is adjustable depending on the surroundings.
- Provides sound and visual (on the display) indication of the presence of explosive vapours.
- Battery discharge indication.
- Does not contain radioactive sources.
- Does not require high level of operators training.
- Does not require periodical adjustment and setup procedures.
- Does not require special gas supply.
Specifications
| Explosives substances under identification |
NG, TNT, EGDN, RDX, PENT and etc. |
| TNT Threshold Sensitivity (under +20°С, 80% humidity) | not less 10-13 g/cm3 |
| Warm-up time | no more 10 sec. |
| Analysis time | no more 1 sec. |
| Indication | Audio & LCD |
| Power Supply: - AC (via 12 V adapter - supplied) - DC (1 rechargeable batteries - supplied) |
100…240 V / 50…60 Hz 7.2V 31.7 Wh |
| One battery pack continuous operation time - in «SEARCH» mode - using sample heater |
not less 5 h not less 3 h |
| Operation conditions: - Temperature - Relative humidity |
+5°C…+40°С up to 90% (under +25°С) |
| Survive after strong environment effect: - Temperature - Relative humidity |
-50°C…+50°C 98% (under +25°C) |
| Storage conditions: - Temperature - Relative humidity |
+5°C…+35°C 80% (under +25°C) |
| Main Unit: - Dimensions - Weight (with battery) |
300х180х90 mm 1.8 kg |
| Total weight in carrying case | no more 7.5 kg |
Packing List
1. Vapor Trace Detector
2. Test unit (Imitator)
3. Sample Heater
4. Self-contained Gauze Sampler Pump
5. Metallic Gauze Sampler - 3 pcs.
6. Special Swab Sampler - 30 pcs.
7. Power cable for the Charger
8. Charger
9. Rechargeable Battery - 2 pcs.
10. Tweezers
11. AC / DC Adapter
12. USB cable
13. User’s Manual
14. Carrying case
15. Software
For more details, you may contact Worldwide Technologies, Vapor Trace Detector Seller in Dehradun India at www.wtpl.co.in
